![]() Also works with some WiFi dongles: list of dongles that work. You can jump to section: 3b) Preparing for first boot up. If you're using Pi-Star 3.4.11 or later with a recent Raspberry Pi* and Auto AP is enabled (which is the default), you don't need to do anything else to prepare to connect to WiFi. ★ 3a) Preparing to connect to WiFi Using the built-in Auto AP (Auto Access Point) method Etcher formats the card, writes the image, and verifies it was written correctly. You can dismiss any system message you get that says you need to format the microSD card when you first insert it or after you finish flashing the image. ![]() A good app for this is Etcher by balena, available for Windows, Mac, and Linux. ∧ Top | Quick links ∨ ★ 3) Flashing Pi-StarĮxtract the downloaded Pi-Star image zip file, and then flash the image file itself (ends in. See: Use DR mode and D-STAR Radio Primer for using Pi-Star video by Craig, W1MSG. 1c) Using D-STAR? Be sure to set up your radio properly!įor most simplex hotspots, you must use D-STAR Repeater (DR) or Duplex mode: set up RPT1, RPT2, and a zero offset (either +/−0.000). 1b) Having trouble?įor some hints about how to proceed, see: Pi-Star troubleshooting. Choose from DMR, D-STAR, YSF, P25, NXDN, and POCSAG. ☆ Also go through the steps marked with an outlined red star for the modes you want to use. ★ Go through the setup steps in sections 1 - 5, marked with a solid red star. It's long because it covers a lot of the rich set of features and configuration options, beyond what's needed to set it up for the first time. Pi-Star is relatively easy to set up for a personal hotspot, so don't be put off by the length of this article. "Pi‑Star can be whatever you want it to be, from a simple single mode hotspot running simplex providing you with access to the increasing number of Digital Voice networks, up to a public duplex multimode repeater!" It can handle DMR, D‑STAR, and YSF, as well as P25, NXDN, POCSAG, and multiple cross modes when used with a multi-mode digital voice modem that supports those modes.Īndy Taylor, MW0MWZ, the main developer, says this on his Pi-Star website : Pi-Star is digital voice software for personal, low-power hotspots, as well as repeaters. For more, see: Pi-Star – Summary thoughts ∨ toward the end of this article. While a talented coder can build their own hotspots directly from those underlying components, Pi-Star makes it possible for the rest of us to easily use that complex functionality, and it is made freely available to our amateur radio community by the main Pi-Star developer, Andy Taylor, MW0MWZ, a gift deserving of our gratitude and support. Sometimes, people even get angry when the Pi-Star team lets them know that they need to make their feature requests to the people creating those underlying components. In some cases when users want new functionality, they don't realize that those features need to be added to those components before they can be incorporated into Pi-Star. There's one aspect of Pi-Star some people don't quite understand that sometimes leads to confusion about feature requests: Pi-Star is a well-made software package built upon and depending on components other people are coding, including the MMDVM suite by Jonathan, G4KLX, and the firmware by Andy, CA6JAU.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |